DJI Mic (2 TX + 1 RX + Charging Case)

Compared with DJI Mic wireless microphone (2 TX + 1 RX + Charging Case), DJI Mic wireless microphone (1 TX + 1 RX) includes only one DJI Mic transmitter and does not include the charging case. The storage bag and charging cable are also slightly different. The rest of the accessories are the same.

DJI Mic (1 TX + 1 RX) is suitable for solo operators to take vlogs or do livestreaming. A operating time of 5 hours is enough for needs like store visiting, vlogging and teaching online class. The price is also more affordable. In the meantime, DJI Mic (2 TX + 1 RX + Charging Case) is more suitable for scenarios with two speakers, such as livestreaming, interview or video shooting. The two transmitters can record at the same time, and with the charging case, the operating time extends to 15 hours, meeting complicated creative needs like long videos and micro films that might take longer time.

You can use DJI Mic wireless microphone with a range of devices, including cameras, smartphones (only Lightning and USB-C ports are supported), computers, Osmo Action 3, and Osmo Mobile 6.

DJI Mic wireless microphone is ready to use without activation. Get registered on the official DJI website and you can get a one-year warranty extension.

DJI Mic wireless microphone supports two recording modes: Mono and Stereo. Under Stereo mode, audio from the two transmitters can be recorded via separate channels, and under Mono mode, audio will be recorded via one channel. As Stereo requires two channels, DJI Mic (1 TX + 1 RX) does not support stereo.

At room temperature, it takes about 1 hour and 10 minutes to fully charge the transmitters and receiver using the Charging Case. It takes about 2 hours and 40 minutes to fully charge the Charging Case.

It is recommended to use the Back Clip to attach DJI Mic to locations such as a shirt collar, or it can be used with the Clip Magnets.

Note: If you need to put the transmitters on any flat surface, use the Clip Magnets to make them stand upright.

DJI Mic transmitters and receiver are already linked by default. If you need to link them again, you can do so in the following ways:

Method 1: Put the receiver and transmitters into the charging case and they will pair automatically. This method only applies to DJI Mic (2 TX + 1 RX + Charging Case).

Method 2: Turn on the receiver and transmitters. Scroll the screen of the receiver downward to enter the control center page. Slide to the left and tap “Settings” to enter the settings page. Slide to the left again and tap “Link” to enter linking mode. Then, press and hold the link button on the side of the transmitters until the green light on the top-left corner flashes and wait for the linking to finish. When the linking indicators of the transmitters turn solid green, it means the linking is successful. This method applies to both DJI Mic (2 TX + 1 RX + Charging Case) and DJI Mic (1 TX + 1 RX).

Yes. DJI Mic transmitters support standalone recording. Press the recording button on the side of the transmitters. A solid red light indicates that recording has started. When fully charged, it can record for up to 5.5 hours. With a constant power supply, it can record up to 14 hours of 24-bit lossless audio.

Note: Audio will be saved as one file for every 30 minutes during standalone recording. When internal storage space runs out, new audio will replace the earliest ones, and new files will also be saved every 30 minutes.

DJI Mic transmitters have built-in 8GB storage and do not support external storage.

To connect with a smartphone: Insert the standard phone adapter into the pogo-pin port at the bottom of the transmitters and connect with your phone. Start shooting or recording on your phone and the receiver will start working.

To connect with a camera: The receiver can be mounted on a camera via the hot shoe adapter. Use a 3.5mm camera connection cable to connect the camera mic port and the 3.5mm audio output port on the receiver. Then, start recording videos on your camera and the receiver will start working.

To connect with a computer: Use a 3.5mm camera connection cable to connect the mic port of your computer with the 3.5mm audio output port of the receiver. Start recording on your computer and the receiver will start working.