The magnetic phone clamp easily connects your phone, gimbal, and DJI OM Multifunctional Module, with a slim, lightweight design for an ideal fit.

This kit includes the DJI OM Multifunctional Module and more. Use it with your gimbal to unlock tracking, audio reception, and lighting features.

This cable connects your iPhone (with a Lightning port) to the DJI OM Multifunctional Module, enabling audio recording and phone charging.

Designed for iPhone users, this mount snaps directly onto your phone's back via MagSafe for a more streamlined creative process.

The magnetic phone clamp securely connects your phone to the gimbal for quick shooting, with a slim, lightweight design for an ideal fit.

31-Min Max Flight Time.

Charge 2 batteries simultaneously in as little as 70 minutes. With at least one battery stored, it can serve as a power bank to charge devices.

Designed for tackling strong lighting conditions and long exposure timelapse.

Propellers specially made for DJI Flip produce less noise and have undergone precise dynamic balancing tests.

Small with high-quality audio. Supports DJI OsmoAudio™ direct connection. Also brings enhanced Bluetooth audio to DJI Flip via the DJI Fly app.

Small and ultralight, yet offers stable high-quality audio. 48-hour battery with charging case. Supports DJI OsmoAudio™ direct connection, delivering detail-rich, pro-grade audio.

Features a 1/1.3-inch image sensor, capable of recording 4K/120fps video. For DJI O4 Air Unit Pro repair and replacement use only.

Equipped with DJI O4 Video Transmission System, For DJI O4 Air Unit Pro repair and replacement use only.

Single-frequency left-hand circularly polarized omnidirectional antenna with strong anti-interference capability.

The module interface can be quickly connected to the Air Unit, with the power and signal lines marked in different colors.

Provides 45-minute flight time and Off-State QuickTransfer for high-speed file transfer, even when the drone is off.

Provides precise control over shutter speed for smooth footage in bright environments with low shutter speeds.

Adopts a precise optical design that expands the FOV of the wide-angle camera to 114°, offering a wider filming perspective.

The remote controller holder can secure the mobile device. The DJI Fly app on the mobile device displays high-definition camera feed in real-time.

The battery provides 18-minute flight time allowing the drone to perform at least 20 palm takeoff and landing excursions in succession.

Charge three batteries simultaneously in just 60 minutes. Store batteries and use the hub as a power bank to charge devices like smartphones.

Enclosing the propellers, prevents contact with external objects and enhances flight safety.

Provide efficient and stable propulsion for the aircraft.

Single transmission module for replacement. Excludes coaxial cable and camera. Quick-release design for quick replacement.

Supports Manual mode, suited for advanced users to practice and master more sophisticated skills.

Provides approx. 23-min flight time. Get ready for immersive flying to create FPV footage more freely and confidently.

The Two-Way Charging Hub can charge three batteries in sequence. It can also serve as a mobile power bank to charge devices.

By selecting the appropriate filter, you gain more control over the aperture and shutter speed.

Combined with DJI Goggles 3, you can achieve immersive "point-to-fly" control.

Experience immersive motion control with DJI RC Motion 3,‌ or pair with the RC-N2 or RC 2 controllers to enjoy FPV flying.

Pair with RC Motion 3 for intuitive motion controls and experience the thrill of immersive flight.

Offer efficient and stable propulsion for the aircraft.

Multiple compartments within the liner can easily store the aircraft, goggles, and a range of accessories.

Allows DJI RS 4 Pro to power the DJI Focus Pro LiDAR and DJI Video Transmitter simultaneously, eliminating the need for a V-Mount battery.

Power DJI RS 4 Pro for up to 29 hours or DJI RS 4 for up to 29.5 hours. Or power your camera and accessories via the USB-C port.

‌The upper quick-release plate's adjustable placement guide fits flush against the bottom of the camera to stop and secure the camera in place.

The lower quick-release plate has scales on both sides and a serrated slot. The fine-tuning knob on the gimbal's tilt axis allows for millimeter-level adjustments when changing cameras or lenses.

The lower quick-release plate allows cinematographers to perform precise, millimeter-level adjustments when changing cameras or lenses.

Motor speed increased by 30%; compatible with 15mm universal rods; built-in RF antenna; latency as low as 10 milliseconds.

The LiDAR boasts 76,800 ranging points and a 20m max range. When paired with the DJI Focus Pro Motor, it can enable autofocus for manual lenses.

The grip is equipped with a magnetic damping dial and a 1.8-inch full-color touchscreen. When used with the DJI Focus Pro LiDAR, it enables autofocus for manual lenses.

The hand unit supports wireless communication with the DJI Focus Pro Motor from up to 160 meters away for FIZ control and damping adjustments.

Mount the DJI Focus Pro Hand Unit and the DJI High-Bright Remote Monitor (or third-party video transmission monitor) together.

High-quality recording, compact and easily concealable, adjustable angle.

Links RX and TX(s) and charges them to reach up to 18 hours of operating time. Stores the transmitters, receiver, and mobile phone adapters.

Connects the DJI Mic 2 receiver to a Sony camera's MI shoe. Enables audio recording without the need for a 3.5mm TRS cable.

Provides a max flight time of 34 minutes, allowing you to fly and create freely with peace of mind.

Get more in each scene with the Wide-Angle Lens, expanding the photo FOV from 82.1° to 114° and video FOV from 75° to 100° (16:9).